FBE Coating Pipe

Fusion Bonded Epoxy (FBE) ke tshireletso e phahameng{{0}e sebetsang hantle ka ntle e sebelisoang haholo makaleng a oli le khase, metsi le litšebeletso tsa motheo. E sebelisoa e le -layer powder coating, FBE bonds ka ho toba le tšepe ea substrate, e etsa mokoallo o teteaneng, o tsoelang pele, le o thibelang ho bola{3}}. Hangata e sebelisoa e le ts'ireletso e ikemetseng kapa e le mohloli oa lisebelisoa tse ngata tsa -layer system (3LPE/3LPP).

• ISO 21809-2– Feme-e kentse FBE bakeng sa liphaephe tse epetsoeng kapa tse kolobisitsoeng ke metsi
• AWWA C213- Ho roala ha FBE bakeng sa liphaephe tsa metsi
• CSA Z245.20- Fusion{0}}epoxy e kopantsoeng bakeng sa phala ea tšepe
• NACE SP0102- Mekhoa ea ho sebelisa le ho hlahloba

Liphaephe tse fapaneng:Seamless, ERW, LSAW, SSAW

OD:½ ″ - 48″ (tloaelo ho fihla ho 60″)

Botenya ba Coating:250 – 500 μm

Thempereichara ea ho sebetsa:-30℃ho isa ho +95 degree

• Boitokisetso ba Sefahleho– Ho phatloha ho matla ho isa ho Sa 2½, boemo ba ankora 50–100 μm
• Ho futhumatsa- Ho futhumatsa kapa ho futhumatsa sebōpi ho likhato tse 200-250
• Kopo ea Phofo– Electrostatic spray ea epoxy phofo
• Fusion & Phekolo- Epoxy e qhibiliha, li-crosslink, li tlamahano ka lik'hemik'hale ho tšepe
• Pholiso & Tlhahlobo- Pholiso e laoloang, licheke tsa botenya, tlhahlobo ea matsatsi a phomolo

• Ikhethang Adhesion & Bonding MatlaFBE e kopana ka lik'hemik'hale le karolo e ka tlaase ea tšepe, 'me e theha maqhama a tiileng a thibelang delamination, leha e le tlas'a khatello ea mobu kapa ho fetoha ha mocheso.
• Tšireletso ea Cathodic CompatibilityHo sebetsa ka tsela e ikhethang ha cathodic disbondment, e netefatsang-bosebetsi ba nako e telele litsing tsa CP moo ts'enyo ea ho bola e ka eketsang kutu.
• Corrosion & Chemical ResistanceDense epoxy matrix e hanela metsi, oksijene, chloride le mefuta e mengata ea lik'hemik'hale, e etsa hore e tšoanelehe bakeng sa tikoloho e ncha le ea letsoai.
• Mechanical & Impact ResistanceLeha e le lera le lesesaane, FBE e bonts'a ho feto-fetoha ha maemo hantle, ho hanyetsa abrasion, le bokhoni ba ho mamella lipalangoang le ho sebetsana le khatello ea maikutlo.
• Melemo ea Tikoloho le Polokeho100% phofo e tiileng, e nang le mokelikeli{1}e sa lefelloeng; tlhahiso e tlase ea VOC; e sebelisoa ka mokhoa o hloekileng oa boiketsetso, o kenyang letsoho ho tsitsitseng.
• Ho feto-fetoha ha maemoE sebetsa ho liphaephe tse otlolohileng, li-bends, li-fittings le lihlopha tsa masimo; e ka sebetsa e le seaparo se ikemetseng kapa primer bakeng sa litsamaiso tse ngata tsa 3LPE/3LPP.

• Botenya: 250-500 μm
• Matla a ho khomarela A maholo ho feta kapa a lekana le 9 MPa
• Cathodic disbondment Ka tlase ho kapa e lekana le radius ea 12 mm (65℃, matsatsi a 28)
• Ho hanyetsa metsi a chesang: Ts'ebetso e ntle haholo ho 65 degree
• Impact resistance: >3 J/mm

• -liphaephe tsa oli le khase tse telele
• Lipeipi tsa metsi (masepala, indasteri)
• Likarolo tsa masimo, li-bends, li-fittings
• Liphaephe tsa tšepe tse epetsoeng le tse kenngoeng ka metsing
• Primer base bakeng sa 3LPE / 3LPP coating multilayer

• Lisebelisoa tse tsoetseng pele tsa ho roalaMehala ea ho roala e ikemetseng ka botlalo e nang le maphephe a ho fafatsa ka electrostatic, futhumatsang ea induction, le taolo e nepahetseng ea pheko e netefatsa boleng bo ts'oanang ho bongata bo boholo.
• Tiisetso ea Boleng bo TiilengLenaneo le felletseng la QA/QC le kenyeletsang 'mapa oa botenya, ho lemoha matsatsi a phomolo, liteko tsa ho khomarela le peel, metsi a chesang, le tlhahlobo ea cathodic disbondment ho latela ISO le AWWA.
• Tumellano ea MaemoLihlahisoa tsohle li netefalitsoe ho ISO 21809-2, AWWA C213, CSA Z245.20, ka ho latelloa ka botlalo ka litifikeiti tsa tlhahlobo tsa EN 10204 3.1/3.2.
• Boiphihlelo ba Morero oa LefatšeRekoto e netefalitsoeng ea ho fana ka li-majors tsa oli le khase, merero ea ts'ebeliso ea metsi, le bo-rakonteraka ba kantle ho naha, ba kopanang le litlhaloso tse thata ka ho fetesisa tsa bareki.
• Flexible Supply & DeliveryHo tloha ho-liphaephe tse seamless ho isa ho tse kholo-dimetara LSAW, Octal Pipe e netefatsa hore ho romelloa ka potlako, ho lokisoa ka mokhoa o ikhethileng, le ho paka ka matla bakeng sa thomello ea machabeng.
• Boleng-Litšebeletso tse EkelitsoengTšehetso ea boenjiniere bakeng sa khetho ea ho roala, lipuisano tsa tekheniki, le kopanyo ea phepelo le litsamaiso tsa 3LPE/3LPP le tharollo ea ts'ireletso ea cathodic.

• Sistimi:Fusion Bonded Epoxy (lera-e le 'ngoe)
• Maemo:ISO 21809-2, AWWA C213, CSA Z245.20
• Liphaephe tse fapaneng:½" - 48" (ho fihla ho 60" ka kopo)
• Botenya ba Coating: 250 – 500 μm
• Mocheso oa Ts'ebetso:-30℃ho isa ho +95 degree
• Lisebelisoa:Oli le khase, lipeipi tsa metsi, manonyeletso a masimong, primer bakeng sa 3LPE/3LPP

Setifikeiti

 

Setifikeiti sa CE

Setifikeiti sa ISO 9001

Setifikeiti sa API Q1

Setifikeiti sa ABS

Setifikeiti sa AP-5L

Setifikeiti sa API-5CT

 

Hot Tags: fbe coating pipe, China bahlahisi ba liphaephe tsa ho roala fbe, barekisi, fektheri