3LPE Coating Pipe

Pipe ea ho roala 3LPE(3-Layer Polyethylene) e kopanyaFBE+ sekhomaretsi sa copolymer + polyethylene (PE) ka har'a-sistimi ea mekato e meraro bakeng sa liphaephe tse epetsoeng le tse ka tlas'a metsi, tse sebetsang e le tharollo ea ts'ireletso ea kantle ea kutu. E kopanya motsoako-bonded epoxy (FBE) primer bakeng sa electrochemical resistance, sekhomaretsi sa acopolymer bakeng sa tlamahano e matla, le lera la kantle la polyethylene (PE) bakeng sa ts'ireletso ea mochini le tikoloho. Seseteme sena se tšoarella nako e telele ha se bapisoa le-lijalo tsa lera le le leng, e leng se etsang hore e be khetho e ratoang ka ho fetisisa ea lipeipi tsa foil, tsa khase, tsa metsi le tsa setereke mobung o mabifi, mathōkong a mekhoabo le libakeng tse lebōpong la leoatle.

Seaparo sena sa 3LPE se koahetsoeng ka phala hangata se hlalosoa e le3LPE e koahelang liphaephebakeng sa melapo e epetsoeng lebopong, mabapa le linōka, le libakeng tse haufi le lebōpo moo k'hemik'hale ea mobu, mongobo, le makhopho a ho sebetsana le mats'oafo a ka senyang likhase tse se nang letho kapa tse tšesaane{0}

Fusion-Bonded Epoxy (FBE)

E fana ka ho khomarela ka ho toba holim'a tšepe ka mor'a ho phatloha ha abrasive.

Liketso

Khanyetso e ntle ea cathodic disbondment, e bohlokoa bakeng sa liphaephe tse sebelisang CP (ts'ireletso ea cathodic).

Ho tsitsa ha lik'hemik'hale libakeng tse nang le asiti le alkaline.

Sekhomaretsi sa Copolymer

E sebetsa joalo ka borokho bo kopanyang lipakeng tsa primer ea FBE le baki ea kantle ea PE.

E etselitsoe ho mamella katoloso ea mocheso le khatello ea mobu ntle le delamination.

E matlafatsa matla a lekhapetla le ho hanyetsa ho kuta, haholo-holo tlas'a ho kenya mochine kapa HDD (Horizontal Directional Drilling).

E hanana le ho qoelisoa metsing a chesang, e etsa bonnete ba hore sebopeho sa boleng bo botle libakeng tse mongobo le mokhoabo.

Jacket ea polyethylene (PE).

E fana ka matla a mochini: ho hanyetsa tšusumetso, taolo ea abrasion, le ts'ireletso ho ts'enyehelo ea ho khutlisa.

E sebetsa e le thibelo ea mongobo khahlanong le metsi a ka tlas'a lefatše, metsi a leoatle, le litšila tsa mobu.

E fumaneha ka limaraka tsa MDPE (Medium Density) le HDPE (High Density) ho latela maemo a projeke.

-Ho tsitsisa ha UV ha nako e telele le ho mamella mocheso ha o pepesehile nakong ea ho kenya kapa ho boloka.

Ka kopanelo, likarolo tsena tse tharo li theha tsamaiso e lumellanang: FBE e tiisa hore e thibela ho bola, -sekhomaretsi se tiisang tlamahano, 'me baki ea PE e sireletsa lipeipi ho tsoa lits'okelong tsa mochini le tikoloho.

Bakeng sa RFQ le ho kenya morero, aTlhaloso ea 3LPE ea ho roala PDFe ka fanoa ka kopo, hangata ho kenyelletsa kakaretso ea ts'ebetso ea ho koahela, lethathamo la tlhahlobo, le lirekoto tse hlokahalang bakeng sa ho amoheloa.ha e hlalositsoe ho PO/ITP.

3LPE Vs FBE

• 3LPE: Lera{0}}raro e meraro (FBE + adhesive + PE) e fanang ka thepatshireletso e matla ya metjhiniKhahlanong le tšusumetso, ho khojoa, le khatello ea mobu, hammoho le mokoallo o tšoarellang oa mongobo bakeng sa ts'ebeletso e patiloeng / e qoelisoang. Hangata e hlalosoa bakeng saho khutla ka majoe, ho hula ha HDD, litsela tsa mekhoabo / litšenyehelo, le maemo a mang a thata a ho kenya.3LPE theko ea ho roalahaholo-holo e fapana le pipe OD/bolelele, tlhokahalo ea botenya ba ho roala, boemo ba ho lokisa holim'a metsi, boholo ba tlhahlobo, le litlhoko tsa ho tšoara / ho paka. Ho bapisa bafani ba thepa ka toka, boloka botenya bo lekanang le thepa ea tlhahlobo ho RFQ.
• Tlhaloso ea Octal Pipe:likhetho tsa rona tsa 3LPE li hatisaho khomarela holimo, ho tenyetseha hantle, le ho hanyetsa tšusumetso e matla, ka boholo bo tloaelehileng ba phepeloOD 88.9–1420 limilimitharale bolelele bo le bong8–18 m(morero-o thehiloe), le bokhoni ba selemo le selemo ba ho roalaho fihla ho 3,000,000 m².
• FBE: Ho na le-layer epoxy coating e tsebahalangho khomarela hantle le ho feto-fetoha ha maemo. E sebelisoa haholo bakeng sali-fittings, li-bends, le libaka tse kopanetsoeng tsa masimo, hape e sebetsa e le lera la pele ho litsamaiso tsa multilayer. Ha ho bapisoa le ho roala 3LPE, hangata e fana katšireletso e fokolang ea mochinitlas'a khatello e matla ea mokokotlo le ho pepesehela abrasion.

3LPE vs 3LPP

• 3LPE: E sebelisoapolyethylene (PE)e le lera le ka ntle, le fanang ka tekanyo e matla ea tšireletso ea ho senya leho tšoarella ha mochinibakeng sa liphaephe tse ngata tse patiloeng (mocheso o tloaelehileng oa ho sebetsa o itšetlehile ka tlhaloso ea morero). Ke mokhoa o sebelisoang hohle,{1}}o sebetsang hantle ka ntle.
• 3 LPP: E sebelisoapolypropylene (PP)e le lera le ka ntle, ho fanaho hanyetsa mocheso o phahamengle boima bo ntlafetseng ha bo bapisoa le PE. Hangata e khethoa bakeng samehala ea litšebeletso tse chesang, litsela tsa lehoatata, le merero e nang le litlhoko tse matla tsa libaesekele tse futhumetseng.

Ka tshebetso

• 3LPEe ratoa ha kotsi ea ts'enyo ea mochini e phahame (ho soahlamana / ts'usumetso / khatello ea mobu, HDD, mobu o mongobo kapa o mabifi).
• FBEhangata e sebelisoa moo ho feto-fetohang le maemo a bonolo a sebopeho (li-fittings, bends, joint joints).
• 3 LPPe nahanoa ha -litšebeletso tsa mocheso o phahameng kapa mocheso o matla o hlokahalang.
•  

• Prep Prep: Ho hloekisoa ha ho phatloha le boemo ba bokaholimo bo netefalitsoeng ho kopana le mokhoa oa ho roala (joalo ka ha ho boletsoe).
• FBE layer: Kopo e nang le taolo ea pheko ho theha motheo oa primer.
• Sekhomaretsi se khomarelang: E ​​laoloang ho qhibiliha / ho phalla ho tlama FBE ho PE.
• PE topcoat: Lera le atolositsoeng bakeng sa ts'ireletso ea mochini le thibelo ea mongobo.
• Tlhahlobo: Licheke tsa botenya, ho lemoha matsatsi a phomolo, le tlhahlobo ea ho khomarelaha e hlalositsoe ho PO/ITP, e fanoeng e le litlaleho tsa ho amoheloa.

Ea ronaPipe ea ho roala 3LPEts'ebetso e khethoa ka mokhoa oa ho laola-haholo-holo ho ea kamoo re laolang katengho lokisa holim'a tšepe, mocheso oa tšepe, kopo ea phofo, le botsitso ba extrusion. Ke ka hona re tsamaisang sistimi e felletseng ea 3-layer e nang le liteishene tse inehetseng bakeng saFBE ea ho roala phofo, sekhomaretsi sa copolymer, lebaki ea ka ntle ea polyethylenesebopeho, kahoo ho roala ho lula ho tsitsitse ho pholletsa le nako e telele ea tlhahiso.

Lintho tsa Bohlokoa tseo re li Sebelisang Mohalang

• FBE epoxy phofo (lesela la pele):e sebelisoa ka ho fafatsa tšepe ea electrostatic holim'a tšepe e futhumetseng hantle ho etsa hore ho be le kutu e matla-e manganga.
• Sekhomaretsi sa copolymer (lera le bohareng):e theha borokho ba tlamahano lipakeng tsa epoxy le PE, ho ntlafatsa ho khomarela le ho sebetsa-nako e telele.
• Polyethylene (PE) granules (lera le ka ntle):e atolositsoe joalo ka baki ea ts'ireletso ho hanela tšusumetso, ho khoholeha, le ho kenella ha mongobo ts'ebeletso e patiloeng/e keneng ka metsing.

Lisebelisoa tse ka Sehloohong le Liteishene tsa Ts'ebetso

• Ho lokisa le ho hloekisa bokaholimo:ho phatloha ho hoholo, ho tlosa lerōle, le taolo ea boemo ba holim'a metsi{0}hobane ho tlama ha tšepe ho qala ka boemo ba tšepe le bohloeki.
• Sistimi ea ho futhumatsa ka induction:futhumatsang phala ho e hlokehang barbotage mocheso mefuta e fapaneng le boloka mocheso tsitsitseng pele phofo spray.
• Lephephe la ho fafatsa phofo la FBE:kopo ea electrostatic powder e nang le mohaho oa filimi o laoloang; ho tšoara phofo / ho hlaphoheloa ho laoloa ho boloka ho roala ho tsitsitse le ho fokotsa litšila.
• Sekhomaretsi + karolo ea ho roala PE extrusion:Sistimi ea extrusion e sebetsa lera la sekhomaretsi le jekete ea PE ka mokhoa o laoloang, o tsoelang pele (lebelo le botsitso ba ho qhibiliha ke senotlolo mona).
• Sebaka sa ho pholile le sa ho qetela:Pholiso e laoloang ho notlela botšepehi ba ho roala, hammoho le boitokisetso ba ho fokotsa joalo ka ha morero o hlokoa.
• Tlhahlobo ea Marang-rang:ho hlahloba botenya le ho lemoha matsatsi a phomolo li ka kopanngoa le tsamaiso ea mosebetsi e le hore litšitiso li fumanoe kapele, eseng ka mor'a ho paka.

Botenya ba 3LPE bo lokela ho amahanngoa le kotsi ea ho sebetsa (pull{1}}in/rocky backfill) le tikoloho ea ts'ebeletso, e sa khethoe e le "nomoro e le 'ngoe e lekanang tsohle.

HoPipe ea Octal, re beha maemo a ronaLiphaephe tse koahelang 3LPEbakeng sa merero moo bareki ba tsotellang lintho tse peli haholo:kotsi ea tšenyo ea ho kenyalelitšenyehelo tsa nako e telele- tsa bophelo bohle. Octal pipe 3LPE e koahetsoeng hangata e hlalosoa bakeng sa-litsela tse tlase tsa mocheso le maemo a thata a ho kengoa hobane e kopane.ho khomarela holimo, ho tenyetseha hantle, le ho hanyetsa tšusumetso e matla, ka phepelo e tsitsitseng e tšehetsoeng keho fihla ho 3,000,000 m² ka selemobokhoni ba ho roala.

• -Lipeipi tsa ho Fetisa Khase ea Tlhaho le Mafura a Khale a Bolelele

Mona ke moo lihlopha tse rekang thepa li tšoenyehileng ka tsonatsela e rarahaneng(matlapa a majoe, mobu o mongobo, ho hula nako e telele, HDD/noka) lekamohelo ea batho ba boraro{{0}.
re tsepamisitse maikutlo mosebetsing oa ho roala o thusang ho fokotsa mosebetsi oa boipheliso{0}}ho hanyetsa tšenyo ea mochine + ho khomarela ka matla-'me re ka hokahanya litlhoko tsa ho roala le maemo a tloaelehileng (project-based), e leng se etsang hore tlhahlobo le phano ea thepa e be bonolo.

• Liphaephe tsa Phatlalatso ea Metsi le Liphaephe tsa Liphaephe

Mesebetsi ena hangata e etsoa ke linako{{0}e tsamaisoang le molumo oa molumo{1}'me bareki baa tsotellaho tšoarella nako e telele nakong ea ho ts'oara / stackinglephepelo e tsitsitsengbakeng sa tlhomamiso e tsoelang pele.
Pipe ea Octal3LPE e fana ka mokoallo o thata oa kantle bakeng sa ho pepeseha ho patoa / metsi, 'me matla a rona a tlhahiso a thusa bareki ho fokotsa kotsi ea phepelo nakong ea lifensetere tsa kaho tse phahameng.

• Likhemikhale & Slurry (Mineral Pulp) Liphaephe tsa Lipalangoang

Hangata mela ena e tsamaea libakeng tsa indasteri kapa libakeng tse thata, moo phephetso ea sebele e leng tengbotšepehi ba nako e telele-le ho qoba li-shutdown tse bakoang ke ho senyeha ha ka ntle kapa ho senya ka ntle nakong ea ho kenya.
Hobaneng ha 3LPE ea rona e lekana:phala ea rona ea 3LPE e etselitsoe ho lelefatsa bophelo ba ts'ebeletso le ho fokotsa litšenyehelo tsa ts'ebetso ka ho kopanya tšireletso ea kutu lemamello e hodimo ya kgahlamelo/ho soahlamana-e thusa ha maemo a ho instola a le mabe.

Ikopanye hona joale

LBH

 

 

Se tloaelehileng ke eng3LPE botenya ba ho roala(DIN 30670 / ISO 21809-1)?

3LPE botenya ba ho roalae hlalosoa ka tekanyo ea morero le boholo ba phala.DIN 30670hangata e fana ka DN{{0}ho ipapisitse le botenya bo tlase ba tataiso (mohlala, DN Ka tlase ho kapa e lekanang le 100: 1.8 mm ho fihla ho DN E kholo ho feta kapa e lekanang le 800: 3.0 mm), le lintlha a+0.7 mm mosebetsi o boima-eketsa moo khatello ea mochini e leng holimo.ISO 21809-1e sebelisa maikutlo a sehlopha sa botenya le ho hlalosa litlhokahalo bakeng sa limela- tse sebelisitsoeng PE/PP lilae tse 3.

Tlhaloso: 3LPE vs 3LPP: phapang ke efe?

Phapang ea mantlha kethepa ea bokantle: 3LPE e sebelisa polyethylene (PE), ha3LPP e sebelisa polypropylene (PP). PP hangata e khethoa ha ho hlokahala matla a phahameng a mocheso a ho sebetsa, ha 3LPE e sebelisoa haholo bakeng sa liphaephe tse patiloeng/ka metsing moo ho tšoarellang ha mochini le ts'ireletso ea kutu li hlokahalang.

Englitekoli hlokahala bakeng saPipe ea ho roala 3LPEkamohelo?

Liteko tse tloaelehileng tsa ho amohela bakeng saPipe ea ho roala 3LPEkenyeletsatekanyo ea botenya ba ho roala, ho lemoha ha matsatsi a phomolo, ebola matla, khanyetso ea tšusumetso, leho arohana ha cathodic(sebaka se itšetlehile ka tlhaloso ea morero).

Setifikeiti

 

Setifikeiti sa CE

Setifikeiti sa ISO 9001

Setifikeiti sa API Q1

Setifikeiti sa ABS

Setifikeiti sa AP-5L

Setifikeiti sa API-5CT

 

Hot Tags: Pipe ea ho roala 3lpe, China Bahlahisi ba liphaephe tsa ho roala 3lpe, barekisi, fektheri